Building log |
![]() |
30-Mar-2010
EIS and probes
|
I almost finished the EIS harness. I first did the wiring of some of the sensors (OAT, ammeter, manifold pressure...) before working on the EIS harness I got with the instrument. Some wires are not needed either because I don't need the attached sensor or because the sensor already has a wire attached. I marked all the wires. The picture shows the EIS side of the harness and the Hall effect sensor for the ammeter. Working time on this subpart Today : 3h (Total : 46h) |
Lectures (2369)