Before installing the left side scat hoses, I fabrocated some small items needed to support the hoses: a few steel straps and some small angles. The strap wraps around the hose and gets bolted to a clamp on the engine mount. The angle is needed because the strap and the clamp are pointing at 90° from each other.



This is the routing from the front ramp. I still have to fabricate or buy the hangers but not before doing a check fit with the lower cowl.



This is the left side muffler exit howe. The air is just vented overboard. If needed, it would be possible to get the air into the cabin by installing another heat-box.