Today I first riveted the three ribs I had prosealed yesterday. Then I riveted the outboard end rib. First I riveted the nose reinforcing plate (the 6 rivets on the right), then I squeezed all the rivets. I surely prefer this method of riveting, but the proseal having had no time to cire I noticed it makes quite a mess.


Then I did all the fillets on the ribs and covered the rivets. I finished by installing the vent line.



Here is a picture of the pick-up bay with the vent and return line. I'll rivet the inboard rib later as I'm still missing some tools to torque the nuts on the lines.